The CC2F double flange dismantling joint can transmit the pressure thrust of the connected parts and compensate the installation error of the pipeline, and can not absorb the axial displacement. The double flange dismantling joint is mainly used for loose connection with the accessories such as pumps and valves. In the course of use, it is mainly different from the compensation joint and the limit compensation joint. Its compensation amount refers to the adjustment amount during the installation and disassemble process. Once all the nuts are tightened, it is rigidly connected and can transmit the shaft. Heart, thus protecting valves, pumps and other equipment.
Henan Shunying provides the dismantling joint installation site for Indian customers. The double flange dismantling joint is suitable for conveying seawater, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, refined oil, air and gas. Medium with steam and granular powder at a temperature not higher than 250 degrees.
It is mainly used to transfer the internal force of the pipeline to avoid damage caused by the products applied in the pipeline system due to excessive concentration of the force, so it is used in various types of pipeline systems.
CC2F double flange dismantling joint: After being installed on the pipeline, it is limited according to the required telescopic expansion and contraction distance, and the nut is tightened. The elastic sealing ring relies on the inclination of the nut under the action of the nut gland, and is pressed against the outer ring of the pipe. Sealing and connecting, mainly connecting with the pipeline valve not only plays the role of pipeline compensation, but also facilitates the repair and replacement of the valve.