Tel.: +86 371 6368 1167 E-mail:


Home > Products > Rubber Expansion Joint > Reduced/Reducing Rubber Joint

Reduced Rubber Joint Coupling is consist of fabric reinforced and metal flange loose joint.

It has the characteristics of compact structure, light weight, high flexibility, easy installation, long service life.

Reduced Rubber Joint, also known as flexible rubber joint coupling, flexible rubber joints, rubber joints, rubber shock absorbers, rubber expansion joints and so on. The product consists of inner and outer layers of plastic, ply and bead composition tubular rubber parts, high temperature, high pressure molding after curing with metal flanges or parallel connector loose jacket combination. This product utilizes the high elasticity of rubber, high gas resistance, chemical resistance, weatherability and resistance to radiation and other advantages to reduce vibration and noise, and thermal expansion and contraction due to temperature changes from the compensation due to the widely used various piping systems.

JGD(KXT)Type Flexible Rubber Joints Eccentric Reducer

JGD(KXT)Type Flexible Rubber Joints Eccentric Reducer

  • JGD(KXT)Type Flexible Rubber Joints Eccentric Reducer
  • JGD(KXT)Type Flexible Rubber Joints Eccentric Reducer
  • JGD(KXT)Type Flexible Rubber Joints Eccentric Reducer

Reduced Rubber Joint Coupling:

(1) Economy: Compared with the systems of mechanic stretching and material damping, Reduced Rubber Coupling has the advantages of little space covering, light weight, easy assembly and disassembly, labor saving and low cost. Its smooth inner wall can reduce flow resistance. It has good water tightness, so there is no need of gasket during the installation. It has wide application, large temperature-resistance scope and long working life. (This product can be used for 20 years if it is used indoors.)

(2) Displacement: Flange is free from pipe decentraction and imbalance. Its good flexibility allows compression, extension, distortion, deflection of vertical displacement, etc. which can prevent the pipeline from damage of deformation and foundation settlement arising from expansion caused by heat and contraction caused by cold.

(3) Shock and noise absorption: The large damping of rubber sphere can effectively buffer and isolate vibration, control and reduce mechanical vibration, and absorb fluid impact noise. The reasonable installation between vibrating machine and metal pipe can decrease structure-borne noise by 15-25 decibels.

(4) Pressure resistance: The multilayered sphere structure can especially endure internal pressure, withstand strong blasting force and impact, and prevent deformation from external pressure. There are many pressure standards on work piece.

(5) Reducibility: After external force compressed, the Reduced Rubber Joint can recover to original state when this force is removed.

(6) Wide application: Different rubber material and formula can make product possess different resistance to heat, oil, corrosion, age, abrasion and ozone.

Diagrammatic Drawing

 JGD(KXT)Type Flexible Rubber Joints Eccentric ReducerFeatures

● Economic and Space Seving

● Limited weight

● Low warping forces

● High-resistance to work

● High-capacity acoustic damping

Material of each parts
1Outer layerNR, CR, IIR, NBR, FKM, EPDM
2Inner layerNR, CR, IIR, NBR, FKM, EPDM
3Skeleton layerPollyester cord
4FlangeQ235, 304, 316L

Material of each components

No.Part Material
2Inner & Outer RubberNR, CR, IIR, NBR, FKM, EPDM, PTFE
3Body CarcassNylon cord fabric
4Reinforcing RingMulti-strand coppering steel wire
5FlangeCast and forged carbon steel Q235, Stainless steel (201, 304, 316, 321), Plastic(CPVC, PVDF, PPH, UPVC, RPP)
Technical arameters
Item |MedolKYT(DN50~300)KYT(DN350~600)
Woring pressure Mpa1.00.6A. If media is oil, acid or alkali.
B. If special requirements for working temperature
C. If OEM orders with drawings or samples
D. Please Inform us about above when ordering
 Burst Pressure Mpa1.81.5
 Vacuum Kpa86.753.3
Applicable Temperature-20℃~+115℃(-30℃~+250℃ under special conditions)
Applicable MediumAir, compressed air, water, sea water, oil, acid, alkali, etc.
Note: the materials of main parts are the same with those of KXT type