Tel.: +86 371 6368 1167 E-mail: info@sypipeline.com

News

Home > News

Six Precautions For Installation Of High Pressure Rubber Joints

Apr. 13, 2019

Six Precautions For Installation Of High Pressure Rubber Joints

Six precautions for installation of high pressure rubber joints shared by Rubber Joint Supplier:

(1) the rubber hose shall not be excessively bent or bent at the root when moving or stationary, but shall be bent at least 1.5 times of its diameter;

(2) when the rubber hose moves to an extreme position, it shall not be stretched too tight, but rather relaxed;

(3) try to avoid torsion deformation of the rubber hose;

(4) the rubber hose should be kept away from the heat radiation components as far as possible, and the heat insulation board is necessary;

(5) external damage of the rubber hose should be avoided, such as long-term friction on the surface of the same component during use;

(6) if the self-weight of the rubber tube causes excessive deformation, there should be supporting parts.

                                   Rubber Joint Supplier

We are the Rubber Joint Manufacturer,welcome to contact us.


Share: