Tel.: +86 371 6368 1167 E-mail: info@sypipeline.com

Products

Home > Products > Expansion Joint Bellows Compensator > Metal Bellows Expansion Joint Compensator

It can absorb lateral displacement from any plane surface, at the same time, absorb axial displacement.

Product Description:

1. Tie Rods Compensator is also called bellows or compensators, which are designed for axial, lateral and angular movements, misalignment and/or vibration in piping systems.

2. Expansion joints come with three convolutions as a standard. More than three convolutions can be customized and the more convolutions, the more movement an expansion joint will provide. Various reinforcements of rings and outer shells are available for high pressures, temperatures or vacuum performance. Tie rods and hinges are designed to limit maximum and minimum movements or preventing movement altogether in certain planes.


JXH Small Tod Horizontal Corrugated Compensator

JXH Small Tod Horizontal Corrugated Compensator

  • JXH Small Tod Horizontal Corrugated Compensator
  • JXH Small Tod Horizontal Corrugated Compensator
  • JXH Small Tod Horizontal Corrugated Compensator
Features as follows

1. Reduce vibration

2. Dampen sound transmission

3. Compensate lateral, torsional & angular movements

4. Compensate axial movements

5. Minimal face-to-face dimensions

6. Lightweight

7. Low movement forces required

8. Reduced fatigue factor

9. Reduced heat loss

10. Corrosion, erosion resistant

Small rod lateral corrugated compensator is composed by two bellows, middle connection tube and small rod that has nuts. It can absorb lateral displacement from any plane surface, at the same time, absorb axial displacement. Small rod can not bear inner pressure thrust.

Design temperature: -20℃~+400℃

Installation notes

If users use small rod, after installation, loosen the nut, a distance from supporting plate. (determined by compensation amount).

If the actual compensation amount is larger than the specified amount, after install the product, dismounting the small rod.


Main Data
DNPressure 0.6MpaPressure 1.0MpaPressure 1.6MpaEffective areaWelding pipeTotal length




(cm²) (mm)(mm)

Axial displacement/Lateral displacementAxial displacement/Lateral displacement/Axial displacement/Lateral displacement/



stiffness/stiffnessstiffnessstiffnessstiffnessstiffness


10032/21096/8.028/25286/9626/30278/12154108×41000
200/2.0180/25162/3.11500
306/0.8927/11284/1.32000
411/0.50370/06333/0.752500
12533/17083/1831/20478/21629/24575/25.9180133×41000
115/6.8109/82103/9.81500
198/3.5188/4.2178/5.02000
269/1.8255/2.2242/2.62500
15032/29065/2130/34861/25227/41758/30.2299159×451000
136/54129/65122/7.81500
107/2.4197/28186/3.52000
279/1.4265/168251/2.12500
20048/32672/4743/39168/56.440/46965/70.5531219×61000
160/11152/13.2144/16.51500
250/5.0237/60225/7.52000
341/2.8324/3.4291/4.12500
25046/400127/2043/480114/2538/576108/30774273×81500
199/9.0179/108170/13.52000
271/5.0257/60231/7.52500
343/3.2325/38293/4.63000